LEXIBOOK RL140 Série Mode D'emploi page 10

How to set up your RADIO
1. On clock mode, press POWER button (1) to enter the radio mode.
2. The frequency last set will be the default. To change the default press
previous/next button to choose your frequency or hold previous/next button for
automatic frequency scanning.
3. To set up the volume press VOL- / VOL+ to increase or decrease the
volume from V00 to V15.
4. If you want to listen to a registered radio station, turn on the radio and press
M+/Light until you find the waveband you want from P01 to P20.
5. To turn off the radio, press POWER button (1).
Note: If you do not press any key for 7 seconds during radio setting mode, the
unit will exit the setting mode.
A few seconds after turning on the radio, the clock will reappear on the screen.
How to register wavebands
To register wavebands on your Dual Alarm Clock Radio, first turn on the radio
by pressing the POWER button.
a) For a manual setting
1. Press MEM/SET, P01 is displayed on screen. Press << / >> to select a
position number for the current radio frequency.
2. Press MEM/SET again to save the current radio frequency at the chosen
position number.
3. Press M+/LIGHT repeatedly to select a radio station saved beforehand.
b) For an automatic setting
1. Press and hold MEM/SET button until it starts scanning the waveband. The
clock radio will save the radio stations (up to 20 positions) from the current
position.
2. The scan stops automatically when the 20 positions have been saved or
when the cycle has been completed.
3. To stop the scan manually, press any button on the clock radio.
4. Press M+/LIGHT repeatedly to select a radio station saved beforehand.
Note: Under alarm setting, it is not possible to choose a waveband among
P01 to P20.
How to set up SLEEP mode
The SLEEP button is used to set the sleep timer on radio mode.
1. When radio is on, press and hold SLEEP button (6) until the SLEEP
indicator lights up.
2. Press SLEEP button again to select the timer among 120, 90, 60, 45, 30
and 15 minutes.
3. To deactivate the SLEEP function, press SNOOZE/DIMMER/SLEEP button
repeatedly until "OFF" is displayed. Do not touch any button on the clock radio
for a few seconds and your choice will be registered.
GLOWING EDGE
1. On clock mode or radio mode, press and hold M+/Light button to turn on the
edge light for a soft luminous effect around the screen.
2. Press and hold the same button to turn it off.
10