LEXIBOOK K8200 Mode D'emploi page 20

5. To disconnect the Bluetooth®, press and hold the Play/pause/pair button or
disconnect the Bluetooth® function on your personal device.
Notes:
• If you exit the Bluetooth® function to choose another function on the unit and
select it again later, the speaker will automatically reconnect with the device it
has previously synchronized with.
• When turned on, the speaker automatically searches for a device that it has
previously synchronized with.
• The Bluetooth® speaker only connects to one device at a time.
• Make sure the effective distance between the Bluetooth® device and the
speaker is within 10m.
Notes: Some music players do not fully support Bluetooth® audio controls. Play/
pause, previous and next buttons on the Bluetooth® speaker may not respond.
The music player may also turn off.
To get the best control experience in the said player, use the on-screen track
controls of your music player rather than those on the speaker.
The Bluetooth® Karaoke System includes three 6.3mm jack inputs: two for
microphones and one for the guitar. While the mic jacks are compatible with the
guitar, the guitar jack is not compatible with the microphone cable.
KARAOKE MODE
The Bluetooth® speaker includes a karaoke feature with microphone (included).
1. Turn on the device and set up the function desired. The microphone works with
all functions: Bluetooth®, AUX IN and USB.
2. Insert the microphone cable into one of the mic jacks and push the on/off button
on the mic to "on" position to power it.
3. Rotate the mic volume knob (16) on the unit to increase (+) or decrease (-) the
microphone volume.
Note: Do not bring the microphone too close to the speakers as it may cause audio
feedback (squealing noise) through the speakers.
Microphone echo adjustment
Rotate the mic ECHO knob (15) on the unit to increase or decrease the microphone
echo effect that best matches your style.
K8200_IM1316_V11_303.indb 20
KARAOKE AND INSTRUMENT SPEAKER SYSTEM
20
4/8/16 4:26 pm