LEXIBOOK Meteoclock Suntime Mode D'emploi page 25

Backlight
Press the
10 seconds.
Displaying the temperature in °C or °F
In Clock 2 mode, press the
degrees Celsius (°C) to degrees Fahrenheit (F°) and vice versa.
Min and Max temperature and humidity
Press the
the minimum and maximum temperature and humidity.
In Clock 1 mode, press and hold the
HI & LO Display
The "HI" and "LO" icons replace the temperature and humidity values onscreen when they fall
outside the scale of transmission.
Indoor and Outdoor Temperature Alarms
You may set temperature alarms for a local channel or a remote channel. If the temperature
reaches the threshold you have set, the alarm will go off.
• Select the temperature alarm mode by pressing the
The icon is displayed and the indoor temperature begins to flash.
key to activate the back light. It will remain on for approximately
key several times in Clock 1 mode in order to scroll through the recordings of
Indoor/ Temperature
Outdoor
Indoor > +55°C
Indoor < -20°C
Outdoor > +70°C
Outdoor < - 30°C
key to switch the temperature display from
key during 5 seconds to reset the recordings.
Humidity Display
> 95%
< 15%
> 95%
< 15%
key several times. (Indoor).
HI
LO
HI
LO