Other Functions - LEXIBOOK Meteoclock Suntime Mode D'emploi

Scrolling through the menus
When you press the
Clock 1 mode (CLOCK 1)
Alarm 1 mode 1
Indoor temperature alarm mode (the
Outdoor temperature alarm mode (the
Clock 1 mode.
Setting Clock 2 (second time indicator)
• Press the
• Press the
the time of Clock 1). Press the
Setting Alarms 1 and 2
• You can set  alarms.
• Press the
• Press the
• Press the
• Press the
the bell symbol
• When an alarm rings, the corresponding icon
• Press the
• Press ANY OTHER KEY to deactivate the alarm. If the alarm is not stopped manually, it will
automatically stop ringing after one minute.


OTHER FUNCTIONS

key, the menu will scroll by in the following order:
Clock  mode (CLOCK )
1 Alarm  mode 
icon will appear and the temperature will begin to flash)
key several times until CLOCK 2 appears to the right of the time.
or to set the time of another time zone (by increasing/decreasing
key several times until the alarm 1 or 2 icon
key to set the hour of the alarm.
key to set the minutes of the alarm.
key to activate or deactivate the alarm. When an alarm is activated,
1 / 2 and the icon ON will appear.
key to repeat the alarm. It will ring again 5 minutes later.
2
icon will appear and the temperature will begin to flash)
key to validate time.
1 or 2 will flash.
12 is displayed.