Honeywell E Série Guide D'installation page 4

Warnings
Installation and servicing should be performed only by qualified and
experienced personnel.
Low voltage cameras must be powered from a UL Listed Class 2
power supply.
For outdoor use, an appropriate protective housing conforming to
IP65.
To prevent fire or shock hazard, do not expose this
camera to rain or moisture.
Safeguards
This camera range is designed for use in general-purpose CCTV
applications and no other purpose.
Only operate your camera between the temperature of -10ºC to
+50ºC (14ºF to 122ºF).
Do not operate your camera outside its specified power supply
range.
Camera must only be used in clean, dry, dust-free environments
unless housed in suitable protective housings to IP65 or better.
Rev 1.01 iv Document 900.0350
05/05