Connecting The Camera - Honeywell E Série Guide D'installation

Note Some installation codes dictate that the mounting bracket
must be capable of supporting up to four times the
combined weight of the camera and lens.
The mounting bracket is not evaluated by UL.

Connecting the Camera

1. Connect the camera to a monitor using compatible coaxial cable.
2. Connect the camera to a power supply appropriate for your installation.
3. Plug in the power supply and switch on the power to the camera.
4. Adjust the lens for optimum picture quality. See "Camera Settings" on
page 2.
Rev 1.01 10 Document 900.0350
05/05