Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Jack-IT Installation Information
Complete installation instructions for the Jack-IT bicycle rack
are detailed in a separate manual on the Customer Service
section of LCI's website. See
lci1.com/bike-racks/support-jack-it-bike-racks and then select
Jack-IT Aftermarket Manual from the listed documents.
Additional Information Sources
Additional information about this product can be
obtained from
lci1.com/support
app. Replacement components can be ordered from
https://store.lci1.com/
or by using the myLCI app. The
myLCI app is available for free on iTunes
iPad
and also on Google Play
®
iTunes
, iPhone
, and iPad
®
®
Apple Inc. Google Play
™
Google Inc.
Safety
THE "WARNING" SYMBOL ABOVE IS A SIGN THAT
AN INSTALLATION PROCEDURE HAS A SAFETY
RISK INVOLVED AND MAY CAUSE DEATH, SERIOUS
PERSONAL INJURY OR SEVERE PRODUCT OR
PROPERTY DAMAGE IF NOT PERFORMED SAFELY
AND WITHIN THE PARAMETERS SET FORTH IN THIS
MANUAL.
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
lci1.com
Jack-IT
or go to https://www.
or by using the myLCI
for iPhone
®
for Android
users.
™
™
are registered trademarks of
®
and Android
are trademarks of
™
574-537-8900
Bump-IT
Rack Adapter
Installation and Owner's Manual
(For Aftermarket Applications)
A
B
and
®
Fig.1
Parts List
Bump-IT Aftermarket Kit PN
Letter Part #
A
729249
B
----
C
118138
D
729250
E
729248
F
118106
G
160117
NOTE: Part numbers are shown for identification purposes
only. Not all parts are available for individual sale. Parts
with a link to the Lippert Store can be purchased.
Resources Required
3/16
•
" hex key (Included with kit)
3/4
•
" adjuster wrench (Included with kit)
• Socket wrench with
Installation
NOTE: The triangular gusset on the end of the Bump-IT
shank should face down, away from the bicycles. This
orientation is important to provide additional strength to the
Bump-It rack.
2
Bicycle
™
D
C
Description
Threaded NoMotion pin, 1/2" - 13 x 3.8"
External tooth lock washer
Flat washer, 1/2"
Bump-It shank, 22.24"
Aluminum adapter, 3.94" x 2"
Hairpin cotter pin, 1/8" x 2.56"
Socket head cap screw, 1" x 25 mm
3/4
" socket (Optional)
CCD-0002228
E
G
F
#723359
Qty
1
1
1
1
1
1
1
Rev:02.11.20
Publicité
Table des Matières
