Step 2 Insert - Belkin N1 Mode D'emploi

Installing and Setting up the Adapter Installing and Setting up the Adapter
Step 2 Insert
Insert the Adapter into your Computer
2.1
After the software installation is
finished, the message "Please plug
in your USB Adapter now" will
appear. Insert your Adapter.
2.2
The Found New Hardware Wizard
might appear. (This may take 3–15
seconds.) If it does, continue with
the following instruction. Select
"Yes, this time only" and click
"Next" to install the hardware.
If the Found New Hardware Wizard
does not appear, skip to step 2.7.
2.3
Select "Install the software
automatically" and click "Next"
to install the hardware.
10 10