English - Philips SCF280 Mode D'emploi

General description (Fig. 1)
Steriliser lid
A
Basket
B
Container
C
Protective grid
D
Water reservoir
E
Mains cord
F
Control knob
G
Measuring cup
H
Base with heating element
I
Indicator LED
J
Cord storage brackets
K
Cap
L
Cover
M
Cover handle
N
Steaming bowl
O
Base with heating element
P
Preparing for use
1 Place the Nutrition Centre on a dry, stable, level and horizontal surface out of the reach of
children.
 Unwind the required length of mains cord from the cord storage brackets in the base.
3 Insert the mains plug into the wall socket.
The indicator LED starts to burn green.
,
The Nutrition Centre is now in standby mode. The appliance does not heat up until you press and
turn the control knob to select a setting.
Using the appliance
temperature overview
Babies like their milk and food to be at a temperature of 37°C. The control knob enables you
,
to set the correct food temperature. The setting depends on the amount, consistency and
current temperature of the milk or food. (Fig. )
- y refrigerator temperature (approx. 10°C.)
- . room temperature (approx. 20°C.)
- m bottle contents up to 200ml
- , minimum bottle contents approx. 60ml
Note:If all the water has evaporated before the heating process is completed, the 3-in-1 Nutrition
Centre starts to beep and the indicator LED starts to blink red. If this happens, press the control knob to
interrupt the heating process and fill the water reservoir.
heating
Heating baby bottles
1 Pour 0ml water into the water reservoir with the measuring cup (Fig. 3).
 Remove the cap from the cover (1) and place the cover on the base (). Place the bottle on
the protective grid in the base (3) (Fig. ).
3 Look up the desired setting in the temperature overview.
The setting depends on the amount of milk in the bottle and the current bottle temperature.

EngliSh

7