Télécharger Imprimer la page

marinco SPLR-1 Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

Remote Specifications
Power
Current draw
(idle / in use)
Wireless range
Estimated
battery life
Dimensions
Weight
Housing material
Button material
Wire
Operating
5°F to 113°F (-15°C to 45°C)
temp range
IP Rating
* There is no wiring required from the spotlight to the bridge remote. The spotlight and the bridge remote must be wired locally to power.
† The hand held bridge remote includes a wrist lanyard and a surface mount cradle.
s The wired bridge remote requires hard wiring of 2 leads from the spotlight to the bridge.
Included *
Wireless Bridge Remote
(SPLR-2)
12 or 24 Volt
(hard wired to power)
negligible
200 ft (65m)
3.5"W x 2.25"H x .75"D
88mm x 57mm x 19mm
2.12 oz. (60g)
UV resistant PC/ASA
Silicone (glow in the dark)
16AWG
IP54
(Optional) †
Hand Held Bridge Remote
(SPLR-1)
CR2450 button
cell battery
negligible
200 ft (65m)
> 40 hours
(continuous use)
2.0"W x 3.78"H x 1"D
51mm x 96mm x 25mm
2.82 oz. (80g)
UV resistant PC/ASA
Silicone (glow in the dark)
5°F to 113°F (-15°C to 45°C)
IP56
(Optional) s
Wired Bridge Remote
(SPLR-3)
12 or 24 Volt
(hard wired to spotlight)
negligible
3.5"W x 2.25"H x .75"D
88mm x 57mm x 19mm
2.12 oz. (60g)
UV resistant PC/ASA
Silicone (glow in the dark)
24AWG
5°F to 113°F (-15°C to 45°C)
IP54
3

Publicité

loading

Produits Connexes pour marinco SPLR-1

Ce manuel est également adapté pour:

Splr-2Splr-3