Remington KF40E Mode D'emploi page 4

ENGLISH
• Plug the product into the mains power supply.
• The lid should be in the down position until the rollers are ready to use.
• The rollers will start to heat up in 3 minutes. Allow 10 minutes for them to reach
the optimal curling temperature.
• When you feel your setters are ready, open the lid for 1 minute and begin use.
• Select the desired size of roller. Use the small rollers for tighter curls; the larger
rollers give looser curls and waves.
• Take a section of hair, about the width of the roller.
• Squeeze the starter clip open and clamp onto the tip of a section of hair.
• Wind the roller right down to the roots.
• Secure the roller firmly in place with the comfort clip.
• Leave all the rollers in the hair until the rollers and hair have fully cooled down
and set the style.
Note: Use fixing spray to help set and keep your style for longer
,
• Remove the rollers from your hair by removing each clip and gently unwinding.
• Let the curl spring back into place and leave the hair to cool fully before styling
to ensure the optimum set.
• Unplug the unit after you have used all the rollers you need.
C CLEANING AND MAINTENANCE
• Unplug the appliance and allow to cool.
• Wipe all the surfaces with a damp cloth.
• Don't use harsh or abrasive cleaning agents or solvents.
• Dry rollers completely before replacing in the unit.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
4