EisSound 42691/A1 Manuel D'utilisation Et D'installation page 6

4
2. Getting Started
2.1 The first time...
Installers
The control unit must be installed once power is fed for the first
time. By default, the control unit is set to stereo for 16
loudspeakers. To configure other settings use the installation
menu option 3.2.1. - Mono/Stereo and 3.2.2. - Audio Output.
To turn on, press the on/off key. The display will light up and
To select discman/MP3/iPod input for the control unit, press
The + - keys have multiple functions. The default function is to adjust the
volume. If no key is pressed on the keypad a few seconds after an
operation, the default function resumes.
To tune to a station, key in the station frequency followed by
the FM key. For example, to tune to the station at 94.7 MHz.
Users
Once the control unit has been installed it is ready for normal
operation.
W
Once the control unit is connected to the mains, it will remain
powered even it is in OFF state. That means that the OFF state
(as indicated in this manual) really means a "standby" state
the icon enabled.
To adjust the volume
To select the tuner, press FM
To automatically seek stations
Key Sequence Display Visual
07:18
CH
vol 55
FM
FM
95.50
94.70
7
9 4 FM
wxyz ghi pqrs
96.70