Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EXTERNAL DATA MEDIA MODE
Note:
If no data medium is inserted/connected,
7
the message »NO DISC« or »NO USB«
appears.
Inserting/connecting music data
media
Inserting the disc
1
Press »
« to open the CD compartment.
.
– The CD compartment opens.
2
Put in the disc with its label facing upwards.
3
Press »
« to close the CD compartment.
.
– The disc is read.
– Display in MP3/WMA mode: the total num-
ber of albums and tracks.
– Display in CD-DA mode: the total number of
tracks and the total playing time.
4
Playback starts automatically.
Connecting an MP3 player or a USB
memory stick
1
Switch the device to standby mode by press-
ing »
8
«.
2
Connect the USB interface of the MP3 player
to the »
« socket of the hi-fi system with a
standard USB cable;
or
insert the USB plug of the USB memory stick
into the USB interface »
tem.
3
Switch on the device from standby by press-
ing »
8
«.
– Display: the total number of albums and
tracks.
Playback
Pausing and resuming playback
1
e
II« to pause playback.
Press »
– Display: the playing time flashes.
30
ENGLISH
« of the hi-fi sys-
-------------------------------------------------------
2
Resume playback with »
– Display: number of folders and tracks or
track information and the elapsed playing
time.
Resuming playback
1
Pause playback by selecting another input
source or press »
8
«.
– If you select the data medium again, play-
back continues from the point at which it
stopped.
Stopping playback
1
To stop playback, press »
– When playback starts again, it begins from
the first track.
Repeating the current track
1
Press »
« briefly during playback.
3
Selecting another track or folder
When you play music CDs, you can select the
track; when you play MP3/WMA files, you can
also select folders.
1
Press »
« or »
3
during playback until the number of the track
you want appears in the display;
or
select the folder by pressing »
select the track with»
»
«.
4
– Playback of the selected track starts auto-
matically.
Searching for a passage within a
track
1
During playback, press »
»
« and hold down until the passage
4
has been found.
2
Playback begins if you release »
»
«.
4
Displaying track information
(for MP3/WMA)
If information about the artist, album and track
are available on the data medium, this is dis-
played (ID3 tag).
e
II«.
«.
7
« repeatedly
4
FOLD –
+«, then
« or
3
« or
3
« or
3
Publicité
Table des Matières
