Guarantee And Service - Philips QG3380/16 Mode D'emploi

EnGlish
18
5 Place the flathead screwdriver in the indicated
area and apply force to separate the inner.
6 Unhook the snap hooks on both sides of the
inner.
7 Remove the transparent cover to expose the
printed circuit board.
8 Lift up the printed circuit board to expose the
rechargeable batteries.
9 Cut the wires to separate the rechargeable
batteries and the printed circuit board from
the appliance.
10 Cut or snap off the battery tabs to separate
the rechargeable batteries from the printed
circuit board.

Guarantee and service

If you need service or information or if you have a
problem, please visit the Philips website at
www.philips.com/support or contact the Philips
Consumer Care Centre in your country. You find its
phone number in the worldwide guarantee leaflet. If
there is no Consumer Care Centre in your country,
go to your local Philips dealer.