Figure 5-13: Routing Table - Cisco Systems Linksys WRT150N Mode D'emploi

Wireless-N Home Router
Show Routing Table. Click the Show Routing Table button to open a screen displaying how data is routed
through your local network. For each route, the Destination LAN IP address, Subnet Mask, Gateway, and Interface
are displayed. Click the Refresh button to update the information. Click the Close button to exit this screen.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. For more information, click Help.
Chapter 5: Configuring the Wireless-N Home Router
The Setup Tab - Advanced Routing

Figure 5-13: Routing Table

21