After Setup; The Internet Appears To Be Unavailable - Linksys MU-MIMO WRT3200ACM Mode D'emploi

To fix the problem on Mac computers, do the following:
1. In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks
will appear. Linksys Smart Wi-Fi has automatically assigned your network a name.
2. In the example below, the computer was connected to another wireless network named
wraith_5GHz. The wireless network name of the Linksys WRT3200ACM router,
Damaged_Beez2.4 in this example, is shown selected.
3. Click the wireless network name of your Linksys WRT3200ACM router
(Damaged_Beez2.4 in the example).
4. Type your wireless network password (Security Key) into the Password field. Click OK.

After setup

The Internet appears to be unavailable

If the Internet has difficulty communicating with your router, the problem may appear as a
"Cannot find [Internet address]" message in your Web browser. If you know that the Internet
address is correct, and if you've tried several valid Internet addresses with the same result, the
message could mean that there's a problem with your ISP or modem communicating with your
router.
Try the following:
• Make sure that the network and power cables are securely connected.
Make sure that the power outlet that your router is connected to has power.
•
• Reboot your router.
• Contact your ISP and ask about outages in your area.
22