After Setup; The Internet Appears To Be Unavailable - Linksys EA5800 Mode D'emploi

4. If you are prompted to enter a network key, type your password (Security Key) into the
Network key and Confirm network key fields. Click Connect.
5. Your computer connects to the network, and you should now be able to access the router.
*Depending on your version of Windows, there could be some differences in wording or icons in these
steps.
To fix the problem on Mac computers:
1. In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks
will appear. Linksys Smart Wi-Fi has automatically assigned your network a name.
2. In the example below, the computer was connected to another wireless network named
wraith_5GHz. The wireless network name of the Linksys EA5800 router, Damaged_Beez2.4 in
this example, is shown selected.
3. Click the wireless network name of your Linksys EA5800 router (Damaged_Beez2.4 in the
example).
4. Type your wireless network password (Security Key) into the Password field. Click OK.

After setup

The internet appears to be unavailable

If the internet has difficulty communicating with your router, the problem may appear as a ''Cannot
find [internet address]'' message in your Web browser. If you know that the internet address is
correct, and if you've tried several valid internet addresses with the same result, the message could
mean that there's a problem with your ISP or modem communicating with your router.
Try the following:
Make sure that the network and power cables are securely connected.
•
• Make sure that the power outlet that your router is connected to has power.
Reboot your router.
•
• Contact your ISP and ask about outages in your area.
19