Replacing The Light Bulb - Sharp SJ-BB02DTXL1-EU Guide D'utilisation

CHAPTER -3: USING YOUR FRIDGE FREEZER
Defrosting
Refrigerator compartment;
• Defrosting occurs automatically in the refrigerator compartment during operation ; water is collected by the
evaporating tray and evaporates automatically.
• The evaporating tray and the defrost water drain hole should be cleaned periodically to prevent the water from
collecting on the bottom of the refrigerator.
Freezer compartment;
• The frost, which covers the shelves of the freezer compartment, should be removed periodically.
• Do not use sharp metal objects for this operation. They could puncture the refrigerator circuit and cause
irreparable damage to the unit. Use the plastic scraper provided.
• When there is more than 5 mm of frost on the shelves, defrosting
must be done.
• Before defrosting operation, place the frozen food in a cool place
after wrapping them in sheets of newspaper in order to obtain its
temperature steady for long time.
• To accelerate the defrosting process place one or more basins of
warm water in the freezer compartment.
• Dry the inside of the compartment with a sponge or a clean cloth.
• Once the unit has been defrosted, place the food into freezer and
remember to consume them in a short period of time.

Replacing the light bulb

To replace the bulb fridge compartment;
1. Unplug your fridge.
2. Remove the refrigerator light cover (A) by pressing the hooks placed both sides of the cover.
3. Replace with a bulb of maximum 15 Watts. (B)
4. Install the cover.
5. Wait for 5 minutes before re-plugging and bring the thermostat to its original position.
When lighting is positioned on top
A
Replacing LED Lighting
If your fridge freezer has LED lighting contact the Sharp help desk as this should be changed by authorized personnel
only.
B
EN -8-
When lighting is positioned on side
B
A