Scan Setting; Programme Information - Ruarkaudio R3 Mode D'emploi

FM radio
When listening to FM, your R3 displays the station name
and other RDS/RBDS* programme information when
available.
*Radio Data System/Radio Broadcast Data System
Change station
Press or to automatically tune to the next
available FM station. If RDS/RBDS is unavailable the
frequency is displayed instead.
To further reduce hiss on weaker FM stations,
we recommend turning 3D sound OFF

Scan setting

You can change the scan setting to only stop at stations
with a strong signal by selecting Menu > Scan setting >
Strong stations only.

Programme information

Choose from radio text, programme type, frequency,
signal strength and date by selecting MENU > Info.
Manual tune
Select MENU > Manual tune then either rotate the
CONTROL KNOB or press
frequency.
Save preset
You can store 10 FM stations in your preset list. The
station name will be stored only when RDS/RBDS is
available. See 'Common functions' section.
Recall preset
See 'Common functions' section.
Mono
As an FM signal becomes weaker, the level of hiss will
increase. To reduce this, select Menu > Mono.
or to change the