Jata electro PL325N Instructions D'usage page 13

• If there are still rests of water in the tank, it is due
to the quality controls made in our production line.
• The cleaning and maintenance done by users, can
not be done by children without any supervision.
• If the cable were to deteriorate it must be changed
by an Authorised Service Centre.
INSTRUCTIONS OF USE
STEAM IRONING
• Set the temperature selector (6) to its maximum position (MAX) by turning it clockwise.
• Before filling the tank with water, set the adjustable steam knob (3) to the off position
• To fill the tank, always do so with the iron unplugged from the mains. Open the filling lid (4) and
pour water into the tank using the cup provided.
• Do not go over the MAX. indication of the tank (8) to avoid overflowing.
• Replace the lid.
• Plug the iron into the mains. The indicator (7) will light on.
• Once the pilot light (7) goes off, turn the steam knob (3) to any of its two positions: minimum steam
or maximum steam
SUPER STEAM
• The temperature selector (6) must always be set to its maximum position (MAX).
• Press and release the button (2). Repeat this operation at intervals between each time you press
the button.
• If you wish to obtain a greater super-steam set the steam control knob (3) to the off
VERTICAL IRONING
• It allows you to remove creases from the garments without them having to be lying on the ironing
board: jackets and coats may be pressed on their hangers; as may be hanging curtains and such.
• Close the adjustable steam knob (3) and place the temperature selector to the (max). position.
• Bring the iron close to the garment in a vertical position and press the steam button (2).
SPRAY IRONING
• To obtain a spray, the temperature selector (6) position is unimportant.
• Press the spray button (1). In case no water should come out, press the button again.
DRY IRONING
• If there is water in the tank, set the adjustable steam knob (3) to the off position
• Plug the iron into the mains and place the selector (6) in the desired temperature for each fabric:
- FIBRAS SINTÉTICAS: SINTHETIC FIBRES: Low temperature (•)
- SEDA – LANA: SILK – WOOL: Medium temperature (••)
- ALGODÓN – LINO: COTTON – LINEN: High temperature (•••)
.
13
.
position.
.