Ventura PB80 Guide De L'utilisateur page 3

Operation
Press the Operation Button to check the storage level of your PB80
powerbank.
Indicator Unlit 5 Flashing 1 solid 2 solid 3 solid 4 solid 5 solid
Storage level 0% 10% 20% 40% 60% 80% 100%
The LED indicators will flash one by one during charging. The current
storage level will be indicated by the number of LED's illuminated. Once
your PB80 is fully charged or if charging is paused, the LED's will power
off.
Charging your PB80 Powerbank using the Home charger.
1. Connect the home charger included to the 12V 1A input port on your
PB80.
2. Plug the opposite end of the Home charger in to a standard AC wall
socket and allow to charge until all the LED indicators have powered off.
Charging your PB80 Powerbank using the Vehicle charger.
1. Connect the vehicle charger included to the 12V 1A input port on
your PB80.
2. Plug the opposite end of the vehicle charger in to the cigarette lighter
socket in your vehicle and allow to charge until all the LED indicators
have powered off.
Jump starting a 12V vehicle
1. Ensure that your PB80 is showing at least 3 LED power level indicators.
If your PB80 is showing less than 3 LED power level indicators it may not
have enough power to Jump start your vehicle.
2. Connect the RED clamp to the vehicle's positive (+) battery terminal
and the BLACK clamp to the vehicle's negative (-) battery terminal.
UK • 3