Jandy VSFHP185DV2A Manuel D'installation Et De Fonctionnement page 13

Jandy Variable-Speed Pumps
®
1
Wire the cable to the RS485 connector
in order of Red(1), Black(2), Yellow (3),
Green (4)
RS485 Cable (22 AWG)
3
Feed RS485 connec-
tor and cable through
the RS485 quick
connect port and
strain relief channel.
4
Connect the RS485
and secure the
RS485 quick connect
port cover back into
place with the screw.
Figure 8. RS-485 Quick Connect Port with Wiring
|
Installation & Operation Manual
1-RED
2-BLACK
3-YELLOW
4-GREEN
2
Remove screw and
RS485 quick
connect port cover
Page 13
ENGLISH