Pioneer Premier PRS-D1000M Mode D'emploi page 13

Four Amplifier
1 Ω to 8 Ω
1 Ω to 8 Ω
1 Ω to 8 Ω
1 Ω to 8 Ω
• Use speakers having an impedance from 1 Ω to 8 Ω.
• The setting of the POWER MODE switch varies according to the speaker impedance. See the "Setting the
Unit" section for details. The same setting is used for four amplifiers.
MODE SELECT switch
must be in MASTER position.
MODE SELECT switch
must be in SYNC position.
MODE SELECT switch
must be in SYNC position.
MODE SELECT switch
must be in SYNC position.
Connect to a car stereo.
For details, see the
"Connection Diagram".
SYNC OUTPUT
Connecting wire with RCA
pin plugs (sold separately).
SYNC OUTPUT
Connecting wire with RCA
SYNC
pin plugs (sold separately).
INPUT
SYNC
OUTPUT
SYNC INPUT
Connecting wire with RCA
pin plugs (sold separately).
SYNC INPUT
12