Axis Communications 5570e IPDS SNA Guide D'installation page 26

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Page 26
14. Choose a port in the Print Server Port field, e.g. LPT1
The valid values for the port numbers are LPT1, LPT2, USB1 and COM1.
15. Click Finish. Next, select the printer drivers for each client operating system. (Windows XP, Windows 2000,
Windows NT4 and Windows 98). These drivers will be automatically downloaded to users' workstations when
they install this printer in the future.
16. Click Continue and OK in the next NDPS window. The new Printer Agent appears in the Printer Agent List
window. Check the Status: it should be Idle.
17. Press Cancel to close the NDPS Manager
Controlled Access Printers
Follow these steps to create a controlled access printer as an object in the Directory Tree, using the NetWare
administrator utility:
1.
Log in as Admin.
2.
Start the NW Admin utility on any Workstation (SYS:PUBLIC\WIN32\nwadmin32.exe).
3.
Browse the context your NDPS Manager resides in.
From the Object menu, select Create. The New Object dialog appears.
4.
5.
Select NDPS Printer. The Create NDPS Printer dialog appears.
6.
Type a name of your choice in the NDPS Printer Name field, e.g. AXIS5FF66A_IPX1
In the Printer Agent Source field, select the source of the Printer Agent.
The following options are available:
- Create a New Printer Agent. If you select this option, you are asked to select either the Novell Gateway or a
third party Gateway.
- Existing NDPS Printer Object in NDPS. Use a Printer already configured as a controlled access printer (NDPS
Printer Object).
If you select this option, a list of current NDPS Printer Objects in this container will be displayed from which
you can select the one you want to use.
- Public Access Printer Agent. Use an existing Printer Agent representing a Public Access Printer.
7.
Select Create a New Printer Agent and click Create to display the Create Printer Agent dialog.
8.
Confirm the Printer Agent name (default is the name of the new printer you are creating) and browse to select
the NDPS Manager to which you want to assign it
9.
Select AXIS Gateway Configuration in the Gateway Type field.
10. Click OK.
11. In the Select the printer's type window choose your printer. If you cannot find the printer, select an
appropriate Generic one (PCL, PS, etc)
12. Select TCP/IP (default) or IPX as network protocol.
13. Click Next.
14. You will find the print server in the next window with the printer attached on the connected port. Depending
on the transport protocol you used when you start the installation, the print server will appear as:
• TCP/IP Network protocol:
IP Address and Port, e.g: 92.168.70.243 and LPT1
Only the ports with a connected printer show up in this window.
AXIS 5570e Installation Guide

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

5570e tcp/ip

Table des Matières