Axis Communications 5570e IPDS SNA Guide D'installation page 23

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

AXIS 5570e Installation Guide
Properties | Details and click Port Settings.
2.
Choose whether error condition pop-up messages are to be displayed by checking the box in the Configure
AXIS Ports dialog. Define the frequency at which the error messages should be displayed after retry. Click OK.
Note:
Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the
print driver provided with the printer. This assures you of the latest driver software.
For Windows NT 4
1.
Install AXIS PrintMonitor on all workstations that will print via the Axis print server.
AXIS PrintMonitor is available free of charge on www.axis.com
2.
To start the Add Printer Wizard, select Settings | Printers from the Start menu and double-click the Add
Printer icon.
3.
The Wizard asks you to select My Computer or Network printer server. Select My Computer, click Next.
4.
Click Add Port... In the Available Ports dialog, select AXIS Port and click New Port...
5.
Select LPR (TCP/IP) as your choice of protocol and click OK.
6.
Enter the IP address or the host name of your print server (Example IP address: 192.168.3.191 or host name:
AXIS181636).
In the Logical Printer Name field, enter the port you wish to use; USB1, LPT1, LPT2 or COM1. Click OK, click
Close. Select Manufacturer, Printers, choose a printer name and if you want to use the printer as your default
printer. Choose if you want to share the printer and print a test page. Click Finish.
7.
You may now configure the port, as described below. The Axis Printer Port is now installed.
Configure the Port:
Select Settings | Printers from the Start menu and highlight the printer you wish to configure. Select File |
1.
Properties | Ports and click Configure Port.
2.
Choose whether error condition pop-up messages are to be displayed by checking the box in the Configure
AXIS Ports dialog. Define the frequency at which the error messages should be displayed after retry. Click OK.
Note:
Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the
print driver provided with the printer. This assures you of the latest driver software.
Page 23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

5570e tcp/ip

Table des Matières