Renkforce 1884853 Mode D'emploi page 4

Operating instructions
24-port gigabit switch
Item no. 1884853
Intended use
This gigabit switch is designed to create a cabled network of computers or other suitable
devices. It features 24 twisted-pair connections (RJ45) and 2 SFP slots. It integrates the
speeds of 1000 Mbps for Gigabit Ethernet, 100 MBit/s for fast Ethernet and 10 MBit/s for
conventional Ethernet into one network. The gigabit switch supports energy-efficient Ethernet.
It detects the length of the connected data cables and automatically adjusts the signal strength
to reduce power consumption.
It can be mounted in a 19" server rack or placed on a surface with the rubber feet. Power is
supplied via an internal power supply with a cold-device plug.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the
operating instructions carefully and store them in a safe place. Only make this product available
to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names included herein are trademarks of their respective owners. All rights reserved.
Package contents
• 1x Gigabit switch
• 2x mounting brackets
• 6x screws
• 4x feet
• 1x power cable
• Operating instructions
Up-to-date operating Instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
Read the operating instructions carefully. This symbol reminds you to read the
operating instructions included with the product.
Safety instructions
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in
these operating instructions, we will assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety information and operating instructions of any other
devices which are connected to the product.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modifications and repairs must be carried out by a technician or a
specialist repair centre.
• If you have any questions which are not answered in these operating instructions,
contact our technical support service or other technical personnel.
b) Electrical safety
• Before connecting the product to the mains, check that your local A/C mains
voltage matches the specifications on the nameplate.
• Never pour liquids over electrical devices or place objects filled with liquid next
to the device. If liquid or an object does get inside the device, power down the
respective socket (e.g. switch off the circuit breaker), and then remove the mains
plug from the mains socket. Discontinue use and take the product to a specialist
repair centre.
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated may destroy the product. The mains
adapter may also generate a fatal electric shock! Allow the product to reach room
temperature before connecting it and putting it to use. This may take several
hours.
• The mains outlet must be located near to the device and be easily accessible.
• Never unplug the mains plug by pulling on the cable. Always use the grips on
the plug.
• Unplug the mains plug from the mains socket if you do not plan to use the
appliance for an extended period of time.
• For safety reasons, disconnect the mains plug from the mains socket during
thunderstorms.
• Only use the network cable provided (or an identical replacement cable) to power
the product.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges
or subjected to mechanical stress. Avoid excessive thermal stress on the mains
cable from extreme heat or cold. Do not modify the mains cable, as this may
damage the components inside the cable. Damaged mains cables can cause a
fatal electric shock.
• Do not touch the mains cable if there are any signs of damage. Power down the
respective mains socket (e.g. via the respective circuit breaker), and then carefully
unplug the mains plug from the mains socket. Never use the product if the mains
cable is damaged.
• Damaged mains cables must be replaced by the manufacturer, an authorised
repair centre or a qualified electrician.
• Never insert or unplug the mains plug when your hands are wet.
• When setting up the product, make sure that the cables are not pinched, kinked
or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
c) Persons and product
• The housing warms up during use. Ensure that there is sufficient ventilation.
Do not cover the housing! Ventilation openings must be kept clean and remain
unobstructed.
• Do not place open flames (such as burning candles) on or directly next to the
device.
• Only use the product in temperate climates. It is not suitable for use in tropical
climates.