Environment Concerns; Declaration Of Conformity - auna DiscoStar Mode D'emploi

Switch the device off and connect the USB charging jack to any computer's USB port to recharge the inter-
nal battery. Alternatively, use a suitable 5V-USB power adapter (not supplied).
The Charging LED next to the display indicates the charging progress which usually takes 6 - 8 hours, depen-
ding on the current charging status of the battery. The LED switches off as soon as the battery is completely
recharged. However, do not exceed 8h of charging time.
• AUX-In prior: In "MUSIC" mode, AUX-In is prior to SD/MMC card or USB flash drive.
• Turn the power button to "off" to cut off the power supply while without use.
• While using the audio input function to connect other devices such as MP3/MP4/PC, all functions now
could only be controlled on the external devices.
According to the European waste regulation 2002/96/EG this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will hep
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more
detailled information about recycling of this product, please contact your local council or
your household waste disposial service.
Manufacturer: CHAL-TEC GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European directives:
1999/05/EC (R&TTE)
2011/65/EU (RoHS)
Charging
Remarks

Environment Concerns

Declaration of Conformity

9