Assembly & Set-Up - Troy-Bilt TB16R Notice D'utilisation

Assembly & Set-Up
Contents of Crate
• One Upper Handle
• Six Carriage Bolts
• One Grass Catcher (Model TB18R)
Mower Set-Up
Attaching the Handle
1. Secure the upper handle to the mid handles with two
carriage bolts, two saddle washers and two wing knobs.
See Fig. 3-1.
Figure 3-1
2. Secure the handle assembled in step 1 to the lower handle
with four carriage bolts, four saddle washers and four wing
knobs. See Fig. 3-2.
3. Position the complete handle assembly over the studs on
the rear of the mower frame. See Fig. 3-3.
• Two Mid Handles
• Six Wing Knobs
• One Operator's Manual
• One Lower Handle
• Six Saddle Washers
• One Product Registration Card
Figure 3-2
Figure 3-3
3
5