Safety Instructions; Use Instructions - LABBOX EASY 20K Mode D'emploi

1. Safety instructions

Place the Bottle top dispenser EASY 20K on a flat, horizontal, and stable table,
leaving at least 30 cm of free space on each side. Make sure that the surface is
adequate for the device's weight.
This item must be used only by previously qualified staff that is familiar with the
equipment and knows how to operate it according to the instructions manual.
Carefully read the instructions in this manual before using the device.
Use the necessary protective clothes, eye protection and gloves according to the
reagent's manufacturer's information.
Pay special attention to splashes and protect yourself adequately
▪ Do not operate this instrument in any manner not described in this 'User manual'.
▪ In case of abnormal circumstances during the manipulation of this device, please
stop the operation of the equipment and contact your supplier.
▪ The precautions described in this 'User manual' are carefully developed in an attempt to
cover all the possible risks. However, it is also important that you are alert for unexpected
incidents.
▪ Use this instrument only for dispensing liquids, with strict regard to the defined operating
exclusions and limitations. (chart on p.11)
▪ Explosive liquids are also forbidden to use with this dispenser.
▪ Before use, check the instrument for visual damages (piston difficult to move, sticking valves
or leakage...) in case of trouble, immediately stop dispensing.

2. Use Instructions

This equipment is designed for dispensing liquids taking into account the following limits:
- 15 to 40 °C of temperature working range
- Steam pressure up to 500 mbar
- Density up to 2.2 g/cm3
3