Before Use; Safety Instructions - JB Systems Mini DMX-Splitter Mode D'emploi

ENGLISH
OPERATION MANUAL
Thank you for buying this JB Systems
operating instructions very carefully.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
 The perfect solution for many DMX-line problems: this mini DMX-splitter divides any DMX-chain in 2
separate lines that will not interfere with each other, problems on 1 line will not influence the other line!
 Booster function makes your DMX-installation more reliable and flexible to set up.
 Can also be used to set up the unique JB-SYSTEMS "DMX Master/slave" system.
 Small size: can be added / hidden anywhere!
 1 DMX-input + 2 DMX-outputs, each equipped with 3pin XLR-connectors.
 Small 9V DC-power adapter included

BEFORE USE

Check the contents:
Check that the carton contains the following items:
 Mini DMX-SPLITTER.
 User manual
Some important instructions:
 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
 To protect the environment, please try to recycle the packing material as much as possible.

SAFETY INSTRUCTIONS:

CAUTION
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
this appliance.
This symbol means: indoor use only
This symbol means: Read instructions
This symbol means: Safety Class III appliance
The device is suitable for mounting on standard flammable surfaces. Standard flammable
surfaces include building materials such as wood and wood-based materials more than 2mm
thick.
JB SYSTEMS
®
®
product. To take full advantage of all possibilities, please read these
CAUTION: To reduce the risk of electric shock, do not
remove the top cover. No user-serviceable parts inside.
Refer servicing to qualified service personnel only.
1/22
OPERATION MANUAL
Mini DMX-SPLITTER