Using Your Refrigerator; Removing The Upper Ventilation Panel; Using The Power On/Off Switch - Kitchenaid Kssc36M Guide D'entretien Et D'utilisation

U
SING YOUR REFRIGERATOR
To obtain the best possible results from your refrigerator, it
is important that you operate it properly. This section tells
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.

Removing the upper ventilation panel

Panel models —
To remove:
1. Grasp both ends of the panel.
2. Push straight up, then pull straight out.
To replace:
1. Insert hooks (located on back of ventilation panel) into
bracket slots.
2. Pull panel down slightly to lock into place.
Wraparound Stainless Steel models —
KSSC36M, KSSC42M, KSSC48M
To remove:
1. Grasp both ends of the louver panel.
2. Push straight up, then pull straight out.
To replace:
1. Insert hooks (located on back of louver panel) into slots on
side trim.
2. Pull louver panel down slightly to lock into place.

Using the Power On/Off Switch

The Power On/Off Switch is located behind the upper
ventilation panel. It is used to turn the power to the
refrigerator off when cleaning it or changing light bulbs.
To turn power off:
1. Remove upper ventilation panel from panel models.
Remove lower panel from wrap- around stainless steel
models.
2. Press Power On/Off Switch to "OFF" position.
To turn power on:
1. Press Power On/Off Switch to "ON" position.
2. Replace upper ventilation panel or lower panel.
IMPORTANT: Be sure the Power On/Off Switch is in the "ON"
position after cleaning refrigerator or changing light bulbs.
you how to set the controls, remove and adjust the
features in your refrigerator, and how to save energy.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or
fire.
5