Resume; Pause; Step By Step Playback; Fast Forward / Fast Reverse - Insignia IS-TV040921 Manuel De L'opérateur

RESUME

1
During playback, press [STOP C].
¡ Resume message will appear on the TV screen.
2
Press [PLAY O], playback will resume from the
point at which playback was stopped.
¡ To cancel resume, press [STOP C] twice.
¡
The resume information stays on even when the
power is turned off.

PAUSE

1
During playback, press [PAUSE F].
¡ Playback will pause and sound will be muted.
2
To continue playback, press [PLAY O].

STEP BY STEP PLAYBACK

1
During playback, press [PAUSE F].
¡ Playback will pause and sound will be muted.
2
The disc goes forward by one frame each
time [PAUSE F] is pressed.
3
To exit step by step playback, press [PLAY O].
FAST FORWARD /
FAST REVERSE
1
During playback, press [FWD
[REV h ].
¡
" g 1" or "h 1" appears on the screen.
2
To select another speed, repeat step 1 until
your required speed number appears on the
screen.
¡
For DVDs, fast forward/reverse search speed is dif-
ferent depending on the disc. Approximate speed is
1(×2), 2(×8), 3(×20), 4(×50) and 5(×100).
¡
For Audio CDs approximate speed is 1(×2), 2(×8)
and 3(×30).
¡ When you press buttons on the front panel, press and
hold [SEARCH h / g] for a few seconds.
3
To return to normal playback, press [PLAY O].
DVD-V CD
1
2
¡ "
3
¡
Slow forward or reverse speed varies with the disc.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
¡ When you press buttons on the front panel, press and
DVD-V CD
hold [SEARCH h / g] for a few seconds.
4
The Zoom function allows you to enlarge the video
DVD-V
image and to pan through the enlarged image.
1
¡ Playback will continue.
2
3
4
DVD-V CD
NOTES:
¡ Zooming function does not work while disc menu is
g ] or shown.
¡
Zooming function is not available on some discs.
¡ It may take several seconds to slide the zoomed pic-
ture.
¡
The picture may be distorted if you operate other
functions repeatedly (ex. [PAUSE F F ] or [REV h],
etc.) in the zoom mode.
- 21 -
SLOW FORWARD /
SLOW REVERSE
During playback, press [PAUSE F].
Press [FWD ] or [REV
g
1" or " 1" appears on the screen.
To select another speed, repeat step 2 until
your required speed number appears on the
screen.
To return to normal playback, press [PLAY O].

ZOOM

Press [ZOOM] during playback.
Press [ZOOM] repeatedly to select the
required zoom factor: ZOOM1, ZOOM2,
ZOOM3 or OFF.
K / L / s / B
Press [ ] to move the zoomed
picture across the screen.
To exit zoom mode, press [ZOOM] to OFF.
DVD-V
] .
h
DVD-V
EN