Know Your Machine - U.S. Products ADVANTAGE-200H Mode D'emploi

SWITCH PLATE
MODEL (1):
This identifi es the model of your
Advantage machine.
VACUUM SWITCH (2):
This push-button switch turns on the
vacuum. The switch will illuminate when it
is on.
PUMP SWITCH (3):
The pump switch will illuminate when it is
activated, and it will turn on the pump.
HEAT SWITCH (4):
The heat switch will illuminate when it is activated and will turn on the heater. NOTE: if the green, two-circuit indicator light is not turned on, you may
have both power cords on the same circuit and this can trip the circuit breaker in the wall.
GREEN, TWO CIRCUIT INDICATOR (5):
This light will automatically turn on when you have plugged the two power cords into separate circuits. If this light does not turn on, try other outlets
with one of the cords until the light does turn on. NOTE: all systems in the machine will operate if this light does not turn on, but you may trip a circuit
breaker in the wall.

KNOW YOUR MACHINE

6 Solution Tank Access
7 Recovery Tank Lid
8 Vacuum Hose Connection
9 Recovery Tank Drain
10 Solution Output
11 Switches
12 Power Cords
13 12" Wheel
14 Castor
4 - FORM NO. 56041938 - ADVANTAGE 200H
1
MODEL
7
8
9
10
I I
3
2
O
O
11
14
I
5
4
O
6
12
revised 11/11
13