Fein ASM 9 Manuel D'utilisation page 18

3 41 01 094 06 0.book Seite 18 Donnerstag, 28. Juni 2007 12:03 12
EN
The red and green LED lights flash.
Anti-clockwise rotation is switched on.
Repair and customer service.
Blow out the interior of the power tool at
regular intervals from outside through the air
vents with dry, compressed air.
Check whether the battery contacts are clean.
The gearbox must be relubricated on the motor pinion
and on the bearing axle of the planetary gears after
250,000 screwdriving operations
(Grease 3 21 32 023 01 0).
If required, you can change the following parts yourself:
Battery, application tools
Warranty and liability.
The warranty for the product is valid in accordance with
the legal regulations in the country where it is marketed.
In addition, FEIN also provides a guarantee in accordance
with the FEIN manufacturer's warranty declaration.
Only part of the accessories described or shown in this
instruction manual will be included with your power
tool.
Declaration of conformity.
FEIN declares itself solely responsible for this product
conforming with the documents and standards given on
the last page of this Instruction Manual.
Environmental protection, disposal.
Packaging, worn out power tools and accessories should
be sorted for environment-friendly recycling.
18