Kingfisher GoodHome Florya Mode D'emploi page 45

Installation
1. Disassemble the wall bracket by loosening the screw (do
not remove, only loosen) and slide the metal plate out of
the hole. Take out the bracket by pulling down.
2. To faciliate obtaining the minimum dimension of 150 mm
(from the bottom of the appliance to the floor), simply
position the wall bracket against the wall, taking care to fit
it in the right direction, with the bottom lugs on the floor,
and mark the hole (Item E at step 1 Fig. D).
3. Move the bracket up until Item F (step 2 Fig. D) reaches the
marks of Item E on the wall. Mark the 8 mounting holes in
the bottom and top lugs. Make sure the bracket is even by
using a spirit level. Drill the diameter corresponding to the
wall plugs and screws.
4. Fix the wall bracket to the wall using 8 screws and plugs
(not provided) adapted to the wall.
5. Position the appliance on the bottom lugs of the wall
bracket and straighten it up until it fits into the top lugs.
6. Slide the metal plate into the hole, and fasten the screw to
lock the wall mount bracket.
195279_s1_s1_3663602437277_GOODHOME_A5_IM_Multi_V09.indb 45 195279_s1_s1_3663602437277_GOODHOME_A5_IM_Multi_V09.indb 45
45
13-05-2020 12:55:36 13-05-2020 12:55:36