Ec Declaration Of Conformity - Makita BBY180 Manuel D'instructions

clockwise to make sure chain fixed well. During
adjustment, if the chain is fixed too tight, please turn
the nut counterclockwise and push the rear wheel
forward.
Parts
Locknut
Stem
Seat screw
Seat and fix the seat parts
Hub
Hub nut
Pedal
Handlebar
For European countries only

EC DECLARATION OF CONFORMITY

We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Motor-assisted bicycle
Model No./ Type: BBY180
are of series production and
Conforms to the following European Directives:
2004/108/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN55014-1: 2006, EN15194: 2009,
EN61000-3-2: 2006, EN61000-3-3: 2008,
EN55014-2/A2: 2008, IEC61000-4-2: 2008,
IEC61000-4-3: 2006, IEC61000-4-4: 2004,
IEC61000-4-5: 2005, IEC61000-4-6: 2006,
IEC61000-4-11: 2004
The following standards are used for safety:
EN14764: 2005, EN15194: 2009
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.,
Michigan, Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
15. 7. 2010
Tomoyasu Kato
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
Standardtwist
14 – 18 N.m.
20 – 25 N.m.
18 – 20 N.m.
18 – 22 N.m.
30 – 35 N.m.
35 – 40 N.m.
18 – 20 N.m.
18 – 20 N.m.
Director
If there are any parts needed to be adjusted, fix the
screw and other parts tightly according to the
requirements below. (Fig. 21)
The press sticker cannot show out
The safety line of stem cannot be seen
The safety line of seat post cannot be seen
Remarks
9