Operation - Use - Bestron DBB2200E Mode D'emploi

OPERATION - General
The appliance is intended only for domestic use,
not for professional use.
1. On/Off switch
2. Cord-rewind button
3. Vacuum suction control
4. Accessory compartment
5. Crevice tool
6. Upholstery tool
7. Vacuum-cleaner handle
8. Cover release button (dust bag)
9. Hose
10. Hose connector
11. Grip with adjustable air opening
12. Chrome telescopic tube
13. Accessory clip
14. Indicator, "dust bag full"
15. Power-indicator
16. Motor unit
17. Combi nozzle
18. Rear wheels
19. Swivelling front wheel
20. HEPA exhaust filter
21. Power cord and plug
OPERATION - Before use for the first time
1. Remove the vacuum cleaner from the packaging, and remove all packaging materials.
2. Verify that a dust bag is fitted. Fit a dust bag, if necessary. See "Cleaning and maintenance".

OPERATION - Use

1. Fit the hose connector in the opening on the motor housing,
see Figure 2. To remove the hose, press on the two release
buttons on the side of the connector and pull the connector from
the opening.
2. Fit the telescopic tube into the hose grip. (see Figure 3a)
3. Fit the combi nozzle or one of the other accessories to the end of the
telescopic tube. You can also fit the combi nozzle or one of the other
accessories directly to the hose grip. (see Figure 3b)
4. You can adjust the length of the telescopic tube as follows
(see Figure 3c):
a. push the slide button on the telescopic tube downwards (in the
direction of the arrow on the button).
b. Keep the slide button pressed downwards, and slide the upper
section of the tube into or out of the upper section.
c. Release the slide button.
16
9
10
8
7
19
5
6
22
User's instructions
2
11
20
21
3
13
4
14
15
1
12
18
17
Figure 2 Fitting the hose to the vacuum cleaner
3a
Figure 3 Fitting the parts together
Figure 1 Features
3c
3b