aqua technix Aqua Maxi 5 Instructions De Montage Et D'utilisation page 12

Caution
When the pump is installed outside, we recommend providing
a simple protection against the weather (rain, sun etc.).
Caution
Implement appropriate measures to attenuate the noise
generated by the pump to avoid damage to the environment.
Fastening the pump to the foundation should be effected
exclusively by means of bolts, threads or dowels, in order to
avoid blocking the removal of the motor unit! Make sure that
there is enough space between the fan cover and the wall,
minimum 50 mm. You also need enough space to permit
disassembly of the strainer basket, minimum 200 mm above.
The pump should be installed as near as
possible at water level and in horizontal
position, in order to keep the suction path
as short as possible and to reduce head
losses. The Aqua Maxi is non self-priming
and therefore should never be installed more
than 30 cm above water level. Make sure
that the suction line is not leaky, otherwise
the pump will prime insuffi ciently or not at
all. The adhesive bonds in the suction and
pressure lines require more time to cure,
allow at least 12 hours before starting the
pump.
12
VD21.45.510-P
VD21.45.511-P
VD21.45.512-P