Accessing Stored Measurement Data - DeFelsko PosiTest AT-M Mode D'emploi

Accessing Stored Measurement Data

The PosiTest AT-M includes the following free solutions for
accessing stored measurements:
PosiSoft Desktop – Connect the instrument to a PC/Mac using the
supplied USB cable. Powerful desktop software for downloading,
viewing, printing and storing measurement data. Includes a
customizable, templated PDF Report Generator. Learn more at
www.defelsko.com/posisoft
USB Drive – The PosiTest AT-M uses a USB mass storage device
class which provides users with a simple interface to retrieve stored
pull-off measurements in a manner similar to USB flash drives and
digital cameras. Access comma-delimited value (.csv) files for
simple import into spreadsheets, databases and other 3rd party
applications. No software required.
NOTE:
When connected to a computer, the USB icon will
appear on the display and the instrument will not automatically
power down. New pull-off tests cannot be performed until the
instrument is disconnected from the computer.
Calibration
Calibrations
manufacturer or by a certified calibration laboratory in a controlled
environment using a documented process. The PosiTest AT-M is
shipped with a Certificate of Calibration showing traceability to a
national standard. For organizations with re-certification
requirements, the PosiTest AT-M may be returned at regular
intervals for calibration. DeFelsko recommends that customers
establish calibration intervals based upon their own experience
and work environment. Based on product knowledge, data, and
customer feedback a one-year calibration interval from the date
the instrument was first put into service is a typical starting point.
Calibration and Verification
are typically performed
7
by the instrument