Table des Matières
Publicité
A06115001_bag.qxp_Layout 1 8/26/16 3:46 PM Page 10
GETTING THE BEST RESULTS
ENGLISH
Special features
Turn dial on top of canister to adjust for use on
1. Suction power dial
draperies (A), upholstery (B), area rug (C), carpet (D)
and hard surface floors or tile (E).
CAUTION: Use 'Brushroll OFF' setting for wood, tile,
2. Brushroll ON / OFF button
or other hard surface floors. Do not use 'Brushroll ON'
setting for hard surface floors, as the brushroll could
damage delicate surfaces.
Hard Floors: Use the hard floor tool. Use the Power
Nozzle. Brushroll OFF.
Carpets : Use the Power Nozzle. Brushroll ON.
This combination tool includes a dusting brush, crevice
3. 3-in-1 tool
tool, and upholstery tool.
• To use as dusting brush (A), press crevice tool side
into telescoping wand or hose handle. Use brush to
dust picture frames, lightweight curtains, blinds,
bookshelves, baseboards, etc.
• To use crevice tool (B), reverse position and press
dusting brush onto wand or hose handle. Use crevice
tool to clean corners, crevices between upholstery
cushions, etc.
• To form upholstery tool (C), pull apart sides of crevice
tool until sides click into position perpendicular to
wand. Use for upholstered furniture, draperies,
mattresses.
• The Power Nozzle is ideal for all types of carpeting.
4. Using the Power Nozzle
including super plush, because of the X-HI height
adjustment setting. Turn off brushroll when cleaning
hard floors.
• The cleaning height can be adjusted by pressing the
height adjustment pedal located on the rear of the
Power Nozzle (A). The height indicator will change
from LO, MED, HI, and X-HI with each press of the
pedal as you make the adjustment from hard floor
to super plush carpet (B).
• Step on the handle release pedal to lower the handle
to the operating position (C).
• If carpet fringe or an object (sock, etc.) is caught in
the nozzle and prevents the brushroll from turning,
a safety cut-off will engage. A red light on the Power
Nozzle (D) will indicate that power to the nozzle has
been interrupted. Turn off power to Power Nozzle or
canister to reset.
•
10
www.electrolux.com
1
A
B
Brushroll ON / OFF button
2
Brushroll ON / OFF contrôle
Brushroll controle ON / OFF
3
4
(D) Check brushroll light
Vérifiez la lumière de brushroll
Compruebe la luz de brushroll
(C) Handle release pedal
Pédale dégagement de poignée
Pedal liberación dela agarradera
C
D
E
(B) Height indicator
Indicateur de hauteur
Indicador de altura
(A) Height adjustment pedal
Pédale d'ajustage de hauteur
Pedal de ajuste de altura
Publicité
Table des Matières
