Connecting The Gp-1 - Nikon GP-1 Mode D'emploi

Connecting the GP-1

Connecting the GP-1
Cameras with Ten-pin Remote Terminals Cameras with Ten-pin Remote Terminals
1 Turn the camera off .
2 Insert the GP1-CA10 cable (
terminal ( ).
) into the connection
3
Aligning the mark on the connector with the mark
on the camera body, insert the ten-pin connec-
tor into the camera's ten-pin remote terminal and
tighten the locking nut.
Connecting the GP1-CA10 to a D3 digital camera
Page 1 of 2 Page 1 of 2
En
7