Equipment Description; Led Indicators; Battery Mode Operation - AKO 52044 Mode D'emploi

4.- Equipment description

SIM card cover

4.1.- LED indicators

Coverage LED Green constant: Connected, good signal.
Green flashing: Connected, weak signal.
Red flashing: In the process of connecting/No signal.
Power supply LED
LEDs de entradas / salidas 1 y 2
LEDs for inputs 3 and 4 Green flashing: Input active

4.2.- Battery mode operation

In the event of a power failure, the alarm can operate for more than 1 hour on battery power. During this time all
of the alarm functions remain operational, including inputs and outputs.
In the event of a power failure/restoration of power, the alarm sends an SMS. (see page 20).
REMARK: It is recommended to disconnect the battery if the equipment remains without power
supply for more than a week, otherwise the battery performance may be affected.
Power supply LED
Coverage LED
External antenna
Reset
Green constant: With power supply. Battery connected.
Green flashing: With power supply. Battery NOT connected.
Red constant: Working on battery power (without power supply).
Switched off: No power supply. Battery not connected or not charged.
Green flashing: Input active
Red flashing: Output active
Red and green alternating: Input and output active.
17
5204H401 Ed.04
LEDs for inputs/outputs
LEDs for inputs
Power supply
input
Relay outputs
Digital inputs