Bluetooth Operation - EDIFIER S1000DB Manuel D'utilisateur

Bluetooth operation

EDIFIER S1000
or
1. Press master volume dial on active speaker or press the "
mode, LED indicator turns to blue.
2. Set your device (mobile phone, tablet device, MP3/MP4 player etc.) to search and select "EDIFIER S1000DB".
3. Pair your device with "EDIFIER S1000DB".
4. Touch play on your device and adjust the volume to a desired level.
Disconnect Bluetooth: Press and hold master volume dial for approx. 2 seconds to disconnect Bluetooth.
2"
Playback: Re-connect Bluetooth to play music.
Note:
1. Bluetooth connectivity and compatibility may be different between different source devices, depending on the
software versions of source devices.
2. To enjoy the full Bluetooth functions of this product, please ensure your mobile device has A2DP profile.
3. PIN code for connection is "0000" if needed.
9
English
" key on the remote control to select Bluetooth
Power output: RMS 25W×2(Treble) +35W×2(Mid-range and bass)
Signal to noise ratio: ≥ 85dBA
Frequency response: 48Hz~20KHz (±4dB)
Input sensitivity: PC: 900 ± 50mV
AUX: 700 ± 50mV
OPT, COX: 350 mFFs ± 50 mFFs
Input type: PC/Auxiliary/Optical/Coaxial/Bluetooth
Mid-range and bass driver: 5.5 inch
Treble driver: 1 inch
Speci cation
10
English