Basic Operation; Aux Input; Optical Input - EDIFIER S1000DB Manuel D'utilisateur

Basic operation

AUX input

S1000DB
Multimedia Speaker
AUX
PC
OPT
COX
Power
L Speaker Out
Off On
100-240V
50/60Hz
400mA
or
1. Press master volume dial on active speaker or press the "PC/AUX" key on the remote control to select AUX
audio source, LED indicator turns to green.
2. Connect PC/AUX input port on active speaker to your audio source (phone, mp3, mp4 player etc) using the
included 3.5mm-2RCA audio cable.
3. Touch play on your device and adjust the volume to a desired level.
7
English
Speaker In

Optical input

S1000DB
Multimedia Speaker
AUX
PC
OPT
COX
Power
L Speaker Out
Off On
100-240V
50/60Hz
400mA
or
1. Press master volume dial on active speaker or press the "OPT/COX" key on the remote control to select
optical audio source, LED indicator turns to red.
2. Connect optical input port on active speaker to your audio source (DVD player etc) using the included optical
fiber cable.
3.Touch play on your device and adjust the volume to a desired level.
Note:
1. Only the standard PCM audio signals (44.1/48 KHz) function in optical mode.
Basic operation
Speaker In
8
English