Monitor Address Programming; Reset Settings; About - Fermax Veo Duox Manuel D'installation

2. PROGRAMMING: NAVIGATION BUTTONS AND MONITOR PUSH-BUTTONS
The icons displayed on the screen (navigation buttons:
via the corresponding push-buttons located on the monitor:
: Return to the previous screen or stand-by.
: Select the previous option from the menu.
: Highlight the next option on the menu.
: Confi rm the selection and activate the function.
Notes:
- The white line at the bottom of the icon indicates the function that is currently in effect.
This may be selected by pressing.
- The monitor exits the programming dialogue automatically after 60 seconds of inactivity.
3. PROGRAMMING: ADMINISTRATOR MENU Screen
3.1 ADMINISTRATOR MENU: Monitor address PROGRAMMING
The monitor will not function if it has not been programmed!
Note: A red LED, blinking slowly, indicates that the monitor is not programmed - once the
monitor address is programmed, the red LED will turn off.
There are three options for programming the monitor from:
A) From the Monitor.
B) From the Panel
C) From the Doorbell.
12
DUOX VEO MONITOR
F2
Navigation buttons
99
,
There are several options:

1. Monitor address programming.

2. Reset settings.

3. About.

Monitor
push-buttons
, and ), are controlled