Care And Cleaning; Declaration Of Conformity (Doc) - BASETech 310 Mode D'emploi

Synchronisation with the DCF time is done automatically daily at
00:00 and 45 seconds, 03:00 and 45 seconds, 06:00 and 45 seconds
and at 12:00 and 45 seconds. This is sufficient to keep the time
accurate to within one second per day.
The DCF radio time signal is sent from a transmitter in Mainflingen
(near Frankfurt am Main, Germany). It has a range of up to 1500 km,
increasing to 2000 km in ideal reception conditions. The DCF
signal contains information such as the exact time and date (with
a theoretical time deviation of one second every million years).
There is no need to set the summer and winter time manually. The
S symbol is displayed when the weather station receives a signal
for daylight saving time (summer time). It disappears when the time
signal received from the transmitter changes again.
Settings
The time/date/alarm setting process will be interrupted if you do not press any
buttons for approx. 2 minutes. The weather station then reverts to the normal
display.
Hold down the UP button (8) or DOWN button (9) to move through the digits faster.
a) Manual time and date setting
You only need to set the time and date manually if the weather station is used
outside of the DCF reception area, in a time zone other than the German time zone
or when the DCF reception is impaired due to the surroundings.
• Press and hold the SET button (5) until the year setting blinks.
• Press the UP button (8) or DOWN button (9) to change the setting. Confirm your selection
with the SET button (5). The month flashes.
• Repeat this process in the same way for the entire setting sequence: Month, day, date format,
12/24 hour clock, hours, minutes.
• Confirm the last setting using the SET button (5). The weather station then reverts to the
normal display.
b) Selecting the temperature unit
• Press the SET button (5) quickly to change the temperature unit (°C or °F) on the weather
station.
c) Measured values outside of the measurement range
• is displayed when the current measured value is outside the measurement range.
d) Air pressure trend display
• The trend indicator shows the air pressure trend. Pointer up=air pressure rising, pointer
horizontal=air pressure remaining the same, pointer down=air pressure falling.

Care and cleaning

• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol, and then enter the product order
number in the search box. The EU Declaration of Conformity is available for
download in PDF format.
Disposal
a) Product
Electronic devices are recyclable waste and must not be placed in household waste.
Always dispose of the product according to the relevant statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
You are required by law to return all used batteries. Batteries must not be placed in
household waste.
Batteries containing hazardous substances are labelled with this symbol to indicate
that disposal in household waste is forbidden. The abbreviations for heavy metals
in batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used batteries can be returned to local collection points, our stores or battery retailers.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
a) Weather station
Power supply ........................................2 x 1.5 V/DC AAA batteries
Operating current ..................................max. 10 mA
Standby power consumption ................40 µA
Transmission frequency........................433 MHz
Reception range ...................................max. 100 m
Indoor temperature display ...................-9.9 to +60 °C
Operating/storage conditions ................ -5 to +20 °C
Dimensions (W x H x D) .......................83 x 159 x 20 mm
Weight ..................................................164 g (without battery)
b) Outdoor sensor
Power supply ........................................2 x 1.5 V/DC AAA batteries
Operating current ..................................max. 8 mA
Protection rating ...................................IPX3
Standby power consumption ................5 µA
Battery life .............................................More than one year
Transmission frequency........................433 MHz
Transmitting range ................................max. 100 m
Outdoor temperature display ................-40 to +72 °C
Temperature accuracy .......................... ±1 °C (for temperatures from 0 °C to +40 °C), ±2 °C
Operating/storage conditions ................ -40 to +70 °C
Dimensions (W x H x D) .......................38 x 105 x 19 mm
Weight ..................................................36 g (without battery)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
(other temperatures)
*1562812_v3_1117_02_DS_m_4L_(1)