Powerfinder High Voltage Adapter - Greenlee POWER FINDER 2007 Manuel D'instructions Et De Sécurité

POWERFINDER HIGH VOLTAGE ADAPTER

• Avoid contact with live circuits.
• Never make connection on a live circuit.
• Do not use this tracer if you are not a qualified, trained
electrical worker.
Electric shock can result in injury or death.
The 38583 Adapter is an electronic high voltage adapter for use
with the PowerFinder™ Circuit Tracer. Using this adapter will
increase the operating voltage rating of your PowerFinder™ to
680 volts AC or 1000 volts DC.
To use this unit simply plug the PowerFinder™ transmitter into the
face of the adapter. Next, connect the adapter clip leads to the
circuit to be traced. Both the transmitter and adapter LEDs will
flash indicating the units are operating. The PowerFinder™ may
be connected using the methods previously shown in this instruc-
tion manual.
Greenlee Textron Inc. / Subsidiary of Textron Inc.
2007 POWER FINDER™ Circuit Tracer
38583 High Voltage Adapter
4455 Boeing Dr., Rockford, IL 61109-2988 USA 815/397-7070
18