Configuration And Settings - Janschitz Milky FJ 50 E Notice D'utilisation

CONFIGURATION & SETTINGS
Control panel of controller unit has four buttons:
• Red button: You enter settings.
• Buttons up and down: Browsing through the settings and changing parameter values.
• Blue button: Starts or stops the heating process.
When device is energized you can read sign "---".
BEFORE STARTING THE HEATING PROCESS MAKE SURE THERE IS SECONDARY WA-
TER IN THE PASTEURIZATOR AND THAT SETTINGS ARE PROPERLY ADJUSTED.
THE SECONDARY WATER HAS TO BE FILLED WITHIN THE TWO WALLS. IF NO WATER
IS FILLED BETWEEN THE TWO WALLS, STARTING THE PRODUCT WILL LEAD TO A
20
DEFECT OR A COMPLETE DAMAGE OF IT.