Dexter Laundry T-30 Manuel De L'utilisateur page 34

prompts, such as Manual Programming, USB Programming and any Error Codes will still display in
English.
7. "Shift Hours": This feature allows the user to shift the time used by the control from the time kept
internally by the control. The control uses a Real Time Clock (RTC) to internally track the time and date.
The RTC continues operation even if the control loses external power. The RTC is set for Central
Standard Time and no daylight savings. Because the machine may be located in another time zone, the
user can choose to create an alternate time & date that tracks in parallel to the RTC. When this alternate
time is chosen, or shifted from the RTC, the alternate time will be used to, for example, track error code
occurrences and set time-of-day pricing changes.
a. The hours in "SHIFT HOURS" can be set by using the "Up" or "Down" buttons to change the
number that is flashing. Once the desired hour shift is chosen, press the "Enter" button to move
to the minutes. Once the hours and minute shift are both chosen, the "Enter" button must be
held down for 3 seconds to confirm that the complete shifted time is set.
8. "Time": The control uses a Real Time Clock (RTC) to internally track the time and date. The RTC
continues operation even if the control loses external power. The RTC is set for Central Standard Time
and no daylight savings. However, if a problem occurs and the RTC time is not accurate, it can be reset
to the current time using this option.
a. The hours in "TIME" can be set by using the "Up" or "Down" buttons to change the number that
is flashing. Once the desired hour is chosen, press the "Enter" button to move to the minutes.
Once the hours and minute are both chosen, the "Enter" button must be held down for 3 seconds
to confirm that RTC is meant to be reset to the complete entry.
9. "Date": Similar to "Time", if a problem occurs and the RTC date is not accurate, it can be reset to the
current date using this option.
a. The day of the month in "DATE" can be set by using the "Up" or "Down" buttons to change the
number that is flashing. Once the desired day of the month is chosen, press the "Enter" button to
move to the month of the year. Once the desired month of the year is chosen, press the "Enter"
button to move to the year. Once the day, month and year are all chosen, the "Enter" button
must be held down for 3 seconds to confirm that RTC is meant to be reset to the complete entry.
10. "Out of Service" – The control can be put into an Out-of-Service mode via manual programming. When
the mode is "ON", the control will scroll "OUT OF SERVICE" on the display. The machine will not react to
any vend input and will not operate when in this mode. The factory default is "OFF".
To reset all values in the Settings options to factory default, press "Enter" when the "DEFAULT" prompt is shown.
Press "Enter" again when the "RESET" prompt is shown to confirm the action.
8514-234-001 REV N page 34