Troubleshooting - Krups BeerTender VB2158 Notice

English
Rinse the pour spout between uses for optimal results. Handwash with
n
warm soapy water. Do not wash in dishwasher - fig. 21.
To remove, unscrew turning counterclockwise from main unit. To re-attach,
n
simply screw back in place turning clockwise.
You should never attempt to access internal parts of the appliance.
n
ImPOrTANT:
completely dried before closing the lid.
STORING THE BEERTENDER
When the BeerTender
n
the DraughtKeg
Remove the plug from the power outlet.
n
Store the BeerTender
n
reach.
Protect from dust and dirt.
n

TROUBLESHOOTING

Problem
The appliance does not
come on.
You cannot position the
tap cover correctly.
8
otice_krups_beertender_nafta.indd 8
After cleaning, ensure all parts of your BeerTender
is not being used for a long period of time, remove
®
and turn the control to "off".
TM
at room temperature in a dry place out of children's
®
Possible causes
The appliance is not
connected to the outlet.
You may have opened
the draught beer tube
(white plastic part at
the end of the serving
tube) by hand. If so, the
tap cover will not close
correctly and there is
a risk for the beer to
flow out.
The DraughtKeg
or tube is not inserted
correctly.
®
remedies
Connect the appliance
to the outlet.
Before installing the
draught beer tube
onto the BeerTender
tapping mechanism,
make sure that the
draught beer tube is
closed.
tap If the draught beer
TM
tube is not installed
properly in the tapping
mechanism or if the
tube is pinched, this
will affect the beer flow.
Please refer to Section:
Using the BeerTender
System to check that
you have properly set
up the BeerTender
have
®
®
®
.
®
10/08/10 11:49:12